Milwaukee M18 FUEL D-Handle Jig Saw Review

Tool Box Buzz rating:

Milwaukee M18 FUEL D-Handle Jig Saw

3/5
Manufacturer: Milwaukee
Model number: 2737-20
Price: $235
Power source: M18 Cordless
Motor size: Brushless 3200 SPM
Weight: 6.4 [w/batt]
We’ve been using the Milwaukee M18 FUEL D-Handle Jig Saw for a few months now and are here to tell you our thoughts.

Upgrades

The M18 FUEL D-Handle Jig Saw is a Gen 2 upgrade from an earlier version. This new saw is brushless, has increased SPM, dust collection and an LED light.

Brushless Motor

Equipped with a brushless motor, it operates at a higher blade speed than corded jig saws. At 3500 strokes per minute [SPM] this saw is capable of cutting up to 105 linear feet of ¾” laminated particle board, that’s the equivalent to about 18 sink cut outs.

We tested this saws noise level, and measured its no-load speed at 101 Decibels.

Variable Speed

There is no variable speed dial adjustment on this saw, it does have a variable speed trigger that controls the saw from 0 to 3,500 strokes per minute. [SPM] This is a blade stroke increase from the older saw that offered 2,700 SPM.

We like that the trigger on this saw is larger and can accommodate two fingers which can reduce stress and fatigue on the user.

Not having a variable speed dial is an issue with us. Not having a variable speed requires you to operate the tool with divided attention tasks. That means  you have to squeeze the variable speed trigger to the speed you desire, all while trying to make a great cut.

For precise tasks I prefer a saw that has a VS setting that lets you “set and forget,” the speed so I can pull the trigger fully, and focus on making that precise cut.

We also found that the VS trigger was not sensitive enough to get a super slow start cut, and started at a faster ramp up speed than we’d prefer.

Accuracy and Blade Deflection

I often find that a jigsaw’s quality can be summed up pretty fast if you try to cut a 45-degree bevel on a piece of 3/4″ plywood. If you can cut that bevel in a nice straight line without fighting the jigsaw than you’ve got a winning combination. This jigsaw had no problem cutting nice straight 45-degree bevel cuts over long lengths.

We tested the jigsaw in Mahogany, Pine and plywood. The saw cuts well in all of those materials, and tracks well. We made straight, 45 degree and scroll cuts and checked for square and parallels. We also did see some moderate, and aggressive scroll cutting in plywood and on this test we did see some moderate deflection on the aggressive scrolls.

When the saw is in the highest orbital setting it plows through material easily – there is no wish for more power on this saw.

Vibration

All jigsaws employ some sort of counterbalance system to reduce the up-and-down shaking created by the reciprocating plunger and blade.

The Milwaukee saw does have noticeable vibration, and more than the new Dewalt XR jigsaw that we just tested.

Blade Change and Blade Stroke

The front of this tool has a plastic, key-less, slide actuated, blade change that ejects the blade. This jigsaw uses all standard T-shank blades.

The saw features a 1-inch stroke length, 4-position orbital actionswitch to allow the jigsaw versatility when cutting different materials.

Bevel Adjustment

The keyless shoe bevel has positive detents at 0°, 15°, 30° and 45° but will also hold its position in between those settings well.

1 LED Light

The Milwaukee M18 FUEL D-Handle Jig Saw has one integrated LED that illuminates the work area well and stays on for 11 seconds after the trigger is released.

Cut Line Blower

 

An On/Off cut line blower keeps the cut line clear of debris, and allows user to turn off blower when using dust extraction.

Dust Collection

The Milwaukee M18 FUEL D-Handle Jig Saw includes a dust cover and dust extraction tube. The saw does a reasonable good job at collecting dust in the non-orbital mode.

Weight

The M18 FUEL D-Handle Jig Saw weighs 6.4 lbs with 5.0 Ah battery and 4.8 lbs. as a bare tool. Milwaukee uses a lot of plastic parts on this saw, probably to keep the weight down, in an already BIG saw. The two plastic saw parts that worry me, are the bevel lever and blade release. Time will tell how these items hold up on the job site.

Improvement

I’m a big fan of Milwaukee tools, but this one still needs more development. It’s a definitely bulky tool even with all the plastic parts it comes in on the heavier side of what I’d like to see for a jigsaw.

The tool vibration needs to be addressed and reduced and Milwaukee should consider adding a variable speed dial to this saw.

How Much and where to Buy?

The M18 FUEL D-Handle Jig Saw sells online as a bare tool for $199.00 and kitted for $299.00. Both options come with the dust tube, shoe guard, anti-splinter guard. The kit unit comes with a 5 ah battery, charger and tool case.

Milwaukee M18 FUEL D-Handle Jig Saw
$235

Overall Conclusion

The M18 FUEL D-Handle Jig Saw is a definite improvement over its earlier version, it has a ton of power, added LED and dust collection. It’s certainly an effective tool, but it’s not quite where I’d want it, to be my “go-to” saw.

Milwaukee M18 FUEL D-Handle Jig Saw Video Review

About the author

Rob Robillard

Robert Robillard is a remodeler, general contractor, and principal of a carpentry and renovation business located in Concord, Massachusetts, and serves as the Editor of Tool Box Buzz and founding editor of A Concord Carpenter . Rob is in charge of our Tool and Product Review - Tool and Product Review - Video Channel, , where we post all of our tool reviews and video tutorials. Rob enjoys using his knowledge and experience to help and educate building professionals as well as DIYers on best practices in the remodeling industry. The Concord Carpenter's motto: "Well done is better than well said!" : Read more about Rob

http://www.aconcordcarpenter.com/@https://twitter.com/robertrobillardRob Robillard

All posts by Robert »

4 Comments

  1. Robert Santos

    any idea on which Milwaukee m18 fuel jigsaw is better?
    D-handle or Barrel handle?

    1. Todd Fratzel

      Better? Not sure we can answer that. They are both the same “tool” inside…just a huge spread of guys out there that prefer one type over the other. It really is a personal preference. If you’ve not tried both types I’d suggest you try both a barrel and d-handle before you purchase your next jig saw.

      1. Jd

        Does the length of the barrel become restrictive.

    2. Todd Fratzel

      I don’t think so, I prefer barrel grip, they feel so different, like I said it’s best to try both.

Leave a comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Disclosure

Product reviews on this site contain our opinion of a product or service. We will always strive for objectivity and transparency in our reviews. Our goal is to provide readers with honest, objective information based on our own experiences. We never have and never will accept payment in exchange for a positive review. Many of the products that we review are provided to us for free by a manufacturer or retailer. In some cases, we also have advertising or affiliate relationships with manufacturers and retailers of products and services we review. For additional information please visit our additional disclosure policies.