By Rob Robillard
Metabo W 12-125 HD CED PLUS 5″ Masonry Cutting and Scoring Tool is a Real Problem Solver The old adage that “Stuff Happens” is alive and well in the construction industry. Well, I cured my most recent construction site “stuff” with the Metabo 5″ Masonry Cutting and Scoring Tool. Fixing Bad Concrete I had to fix […]
Continue reading »
By Will Endicott
SKILSAW® Introduces 16 Inch Worm Drive Sawsquatch™ Carpentry Chainsaw SPT55-11 SKILSAW has announced the release of their 16 Inch Worm Drive Sawsquatch Carpentry Chainsaw. This innovative new saw helps professionals increase productivity on the jobsite by combining a large depth of cut in a lightweight package. Specs Amperage: 15 RPM: 6300 Bar Length: 16” Blade […]
Continue reading »
By Will Endicott
SkilSaw SPT70V-11 16-5/16″ Magnesium Super Sawsquatch Worm Drive Saw There are two types of carpenters in this world. Those who prefer their circular saw blade oriented on the right, and those who prefer it on the left. I most certainly fall into the latter group. I exclusively used worm drive saws for years while I […]
Continue reading »
By Rob Robillard
Delta 26-2250 12 in. Dual Bevel Sliding Cruzer Miter Saw Review The folks at Delta are working hard to get back into the game. They recently introduced the brand new CRUZER miter saws. The CRUZER has a unique, robot-like arm that allows the saw to perform similar to a sliding miter saw. Similar to the […]
Continue reading »
By Jeff Williams
Skilsaw Announces Super Sawsquatch Beam Saw At STAFDA (Specialty Tools & Fasteners Distributors Association) trade show last month, Skilsaw introduced another new tool. It’s a brand new worm-drive beam saw. The call it the Super Sawsquatch (model SPT70V-11) but it is also very worthy of the name beast. This beast of a saw has a […]
Continue reading »
By Jeff Williams
Skilsaw Announces Heavy Duty Worm Drive Table Saw New tools come out seemingly every day. Many of them are complete redesigns over previous models but sometimes they are incremental improvements that fix the issues with the previous model. We reviewed the Skilsaw Worm Drive Table Saw when it first came out. The sheer power and […]
Continue reading »
By Rob Robillard
SKILSAW 7-1/4 In. SPT67M801 SIDEWINDER Circular Saw Review Lately it seems that I’ve mostly been talking to you guys about cordless tools. Not today…. As an “East Coast” contractor I’m accustomed to working with a right-bladed side-winder saws, but SKILSAW SOUTHPAW provides visibility that’s hard to deny, with the durability of a worm drive. SKILSAW […]
Continue reading »
By Rob Robillard
Hitachi 10-Inch Job Site Table Saw with fold and Roll Stand C10RJ Review The Hitachi 10” Job Site Table Saw is new and welcomed addition to the job-site. This new saw, has a fold and roll stand that attaches with 4-bolts. It’s optional if you decide you don’t want a stand, but I think once […]
Continue reading »
By Rob Robillard
Milwaukee M18 FUEL Metal-Cutting Circular Saw 2782-22 We took a look at the new Milwaukee M18 FUEL Metal-Cutting Circular Saw 2782-22. This new Metal-Cutting Circular Saw features a lightweight housing and gearing system. As part of the M18 FUEL lineup, the Metal-Cutting Circular Saw features three Milwaukee innovations: POWERSTATE Brushless Motor that spins at 3,900 […]
Continue reading »
By Rob Robillard
Bosch GSA18V-125 18V EC Brushless 1-1/4″-Stroke Reciprocating Saw Review The new Bosch GSA18V-125 Cordless Reciprocating Saw looks almost futuristic in design.While not the first to come out with an angled reciprocating saw, Bosch’s intent with this saw was to start with a clean sheet and produce the best 18V cordless reciprocating saw on the market. […]
Continue reading »