
Contributing Editor Scott Arnold is the owner of Scott Arnold Remodeling LLC out of Waltham MA. Custom decks, fireplace makeovers, kitchens and bathrooms, Scott enjoys the frame to finish concept. Scott will share his perspective on tools as carpenter and remodeler here and on AConcordCarpenter.com
Scott Arnold
By Scott Arnoldr
Stabila LD250 Bluetooth Laser Distance Measurer The modern alternative to the traditional tape measure is a laser distance measurer (LDM). You won’t need to rely on another person with a steady hand to conduct accurate measurements with the Stabila LD250 BT Laser Distance Measurer because LDMs can be handled by a single person across long […]
Continue reading »
By Scott Arnoldr
DEWALT 20V MAX 3 x 360 Green Laser – Model DCLE34030G-QU The concept of a laser level has been around since at least the early 1970s, the original spinning-mirror design laser plane and line-level was patented by the late 1980s, and the compact lens-based laser line level (as produced by many tool manufacturers today) was […]
Continue reading »
By Scott Arnoldr
Milwaukee M18 FUEL Mud Mixer Review – Model 2810-22 Is an 18-volt mixer capable of mixing heavy compounds? Other brands use 36 volts, 40 volts, and even 60 volts. Milwaukee is not one of them! The Milwaukee Fuel Mud Mixer is a powerful machine that relies on the M18 platform. Concrete mixing and mortar mixing […]
Continue reading »
By Scott Arnoldr
Truewerk T1 Werkpants We recently looked at the Truewerk T1 Werkpant. Truewerk, is one of the most recognizable clothing brands, in the construction industry. I always get hot on the job site, regardless of the temperature. Even if it’s below zero outside, I’m sweating! I’ve always wanted a pair of pants that are both lightweight […]
Continue reading »
By Scott Arnoldr
Magnum Rear Rack System Review In May of 2021, we teamed up with the Shyft Group and did an in-depth review of the Magnum Headache Rack. Recently we teamed up with the Shyft Group again, this time for the Rear Rack System which works in conjunction with the Headache rack. Anyone who utilizes their truck […]
Continue reading »
By Scott Arnoldr
DEWALT Cordless Multi-Tool Review The Tool Box Buzz crew recently finished our Cordless OMT Head to Head. Finishing in the top 5 of our categories, was the DEWALT DCS355B. It finished 4th overall in the Head-to-Head final rankings. Let’s take a closer look at the DCS355B DEWALT DCS355B Specifications 20V – 4.0 Ah battery 0 […]
Continue reading »
By Scott Arnoldr
Metabo HPT 36v Metal Connector Nailer Model NR3665DA The Metabo HPT 36V MultiVolt Cordless Metal Connector Nailer is designed to increase productivity on the residential framing job site by eliminating the need to navigate long hoses around the job site. When Metabo HPT reached out to us for a review the timing could not have […]
Continue reading »
By Scott Arnoldr
Makita X-LOCK Grinder – Model XAG25Z Makita has been on a roll with releasing some new tools over the past several months. Recently released was their new angle grinder with X-Lock technology and they sent one to us for review on our job site. In this review, we are taking a look at the Makita […]
Continue reading »
By Scott Arnoldr
Dewalt 20V Atomic Impact Driver – Model DCF850 Dewalt 20v Atomic Compact Impact Driver is a 3-Speed Impact Driver, with a length of less than 4 in., that can handle tight applications such as framing without the use of a second tool. This Impact Driver is small and lightweight, but its brushless motor provides enough […]
Continue reading »
By Scott Arnoldr
Milwaukee M12™ Compact Spot Blower – Model 0852-20 Milwaukee’s job site cleanup solutions continue to grow with the introduction of the M12 Compact Spot Blower. The new compact blower, which provides more control and faster clean-up, significantly reduces the time spent cleaning up after applications. It is perfect for cleaning a shop floor, driveway, and […]
Continue reading »