Jeff Williams

Contributing Editor Jeff Williams is a carpenter for a commercial General Contractor specializing in concrete, steel, and wood buildings. Jeff comes from a long line of contractors. His parents started a commercial General Contracting firm many years ago and it has afforded him life-long, hands-on learning opportunities from rough and fine carpentry all the way to structural steel and concrete. Jeff has a Construction Management degree and loves the thrill of coordinating and successfully managing large jobs from start to finish. Inspired by the difficulties sometimes encountered to complete punch lists his motto is, "Work hard until the job is done."

@jeff_williamsJeff Williams

All posts by Jeff

RIDGID Gen5X Tools Announced

RIDGID Gen5X Tools Announced Today RIDGID Power Tools announced the next iteration in their 18V lineup dubbed RIDGID Gen5X. The always capable X4 system has been out for a few years but today a teaser video and specifications were posted to the web for the soon to be released new line. The dimly lit video […]

Continue reading »

Milwaukee M12 Fuel Circular Saw Preview

Milwaukee M12 Fuel Circular Saw Preview Last August the Tool Box Buzz team attended the Milwaukee Tool New Product Symposium where they showed off a number of new tools. The M18 tools dominated most of our coverage articles but one tool we shared over our social media channels was the M12 Fuel Circular Saw. It is […]

Continue reading »

Milwaukee M12 Heated Gear Review

Milwaukee M12 Heated Gear Review Five years or half a decade. No matter which way you say it that’s how long Milwaukee heated gear has been changing the way we work and play in the winter months. It all started with the introduction of the first jacket in classic Milwaukee Red. The next few seasons […]

Continue reading »

Dremel MICRO 8050 Rotary Tool Kit Review

Dremel MICRO 8050 Rotary Tool Kit Review About a month ago I picked up the Dremel MICRO at The Home Depot. I already own a Dremel 400 XRP that I’ve had for a number of years. It’s a workhorse used on every trim job I take on but it’s set up exclusively for fine tuning coped […]

Continue reading »

Hart C-Clamp Review

Hart  C-Clamp Review This last summer Hart tools released a number of new and innovative tools including the previously reviewed Hart 2-Inch CinchTight Clamp. Another welcomed addition is the new line of Hart C-Clamps. Often times I use C-Clamps in welding or other metal work. I’ll even use them from time to time in woodworking […]

Continue reading »

Milwaukee M12 Wireless Jobsite Speaker Preview

Milwaukee M12 Wireless Jobsite Speaker Preview Today Milwaukee announced another entry into the audio category. This one coming just 11 months after the introduction of the first charging radio with bluetooth audio connectivity and this time around it’s in the form of a much simpler speaker. Gone are the charger components and tuner modules but that leaves […]

Continue reading »

NOVA LAUNCHES IMPROVED INFINITY QUICK CHANGE CHUCK SYSTEM

NOVA LAUNCHES IMPROVED INFINITY QUICK CHANGE CHUCK SYSTEM Enhance Productivity, Spend More Time Turning! St Petersburg, Fla. – September 11, 2014 – NOVA, a leading innovator in the woodturning and woodworking industry for more than 25 years, is introducing a new and improved version of its NOVA Infinity Quick Change Chuck System (http://www.novainfinitychuck.com/), and is […]

Continue reading »

Adding a Bandsaw Riser Block

Adding a Bandsaw Riser Block In the last article, we shared some tips on how to tune up a RIDGID Bandsaw. We alluded to some additional accessories that can make the saw even better. In this article you’ll see how to install a 6″ bandsaw riser block so that the saw will be able to cut […]

Continue reading »

Milwaukee M18 FUEL Rotary Hammer Preview

Milwaukee M18 FUEL Rotary Hammer Preview At last week’s media event we saw so many tools and all of them were pretty impressive. Milwaukee has been on a mission as of late to make cordless tools as fast or faster than their corded counterparts. They’re trying to prove that cordless tools can be heavy duty tools. […]

Continue reading »

Milwaukee M18 XC5.0 Battery & Rapid Charge Station Preview

Milwaukee M18 XC5.0 Battery & Rapid Charge Station Preview As we mentioned in our other Milwaukee Tool preview posts this week, we have just returned from the Milwaukee Tool 2014 New Product Symposium where we saw and tried all sorts of new tools coming this fall and winter. If you were unable to follow along […]

Continue reading »

Page 5 of 10« First...34567...10...Last »